Preventative Maintenance Agreements
Free Plumbing Check Included
Maintenance plan customers now receive a complimentary whole-home plumbing inspection, giving you a proactive, full-system check to help prevent issues before they start.
What We Inspect:
- Bathroom: Faucets, drains, piping, toilets, shut-off valves, and spa/whirlpool functionality
- Kitchen: Sink, disposal, dishwasher, ice maker line, and water connections
- Laundry: Washer hoses, shut-off valves, and utility sink components
- Water Heater: Valves, connections, expansion tank, temperature, and sediment flush
- Exterior: Hose bibs and main clean-out access
- Additional Systems: Water pressure, shut-off valves, backflow, softeners, and filtration systems
Stay ahead of plumbing issues before they start. Ask us about enrolling in a Preventative Maintenance Plan today.
Air Conditioning
● Evaporator coil cleaning and inspection
● Condenser coil cleaning and inspection
● Clean and inspect drain lines
● Remove standing water from drain pans
● Inspect ducts for dust, mold or debris
● Check thermostats and controls to ensure proper operation
● Clean and inspect all electrical connections and the electrical system
● Clean and inspect all electrical system components
● Clean and inspect major components (blower, compressor, condenser fan)
● Measure the refrigerant charge and system efficiency
● Perform full operational check-out of system
● Check the HVAC cabinet and duct work for leaks
● Remove any debris from around outdoor unit
● Verify entire system is operating safely and efficiently
Ductless Mini-Splits
● Clean and inspect burner assembly
● Replace oil nozzle
● Replace oil filter
● Clean pump screen
● Brush, clean, and inspect tubes, retention head, and smoke pipe
● Check igniter spark
● Check oil pressure
● Check electrical wiring and connections
● Check electrical components
● Check control voltage
● Check zone valve wiring and voltage
● Check expansion tank pressure
● Perform operational checkout
● Test combustion
● Check for leaks
● Verify entire system is operating safely and efficiently
Fireplace
● Inspect wall switch/remote operation
● Inspect control module & wiring
● Test safety shutoffs
● Verify battery condition (replace if customer supplied or billed)
● Inspect burner tray and ports
● Clean light dust/debris (no deep disassembly)
● Inspect pilot assembly
● Clean pilot hood and flame sensor
● Verify proper ignition sequence
● Inspect logs for proper placement, cracks, or damage
● Inspect firebox condition
● Inspect glass condition and gasket
● Perform leak check at gas valve and all connections
● Verify proper shutoff operation
● Check for signs of overheating
● Verify entire system is operating safely and efficiently
Gas Boiler/Tankless Boiler
● Clean flame rods and/or burners
● Flush condensate drains
● Inspect heat exchanger
● Inspect electrical components
● Amp draw on electrical motors
● Combustion test analysis
● Check for gas and water leaks
● Verify entire system is operating safely and efficiently
Gas Furnace
● Inspect ignition burner assembly
● Inspect heating elements or heat exchanger (if these get damaged, they could create an unsafe situation due to carbon monoxide buildup in your home
● Clean and inspect the flue system
● Check gas lines and fittings for leaks
● Verify gas pressures are within range
● Clean and inspect drain lines
● Inspect ducts for dust, mold, or debris
● Check thermostats and controls to ensure proper operation
● Inspect all electrical connections and the electrical system
● Clean and inspect major components (blower, compressor, and condenser fan)
● Perform full operational check-out of system
● Check the HVAC cabinet and duct work for leaks
● Verify entire system is operating safely and efficiently
Geothermal
● Clean and inspect drain lines
● Clean and inspect evaporator coil
● Inspect ducts for dust, mold or debris
● Measure anti-freeze level in underground piping
● Inspect underground piping
● Repressurize system as needed
● Check thermostats and controls to ensure proper operation
● Inspect all electrical connections and the electrical system
● Clean and inspect major components (blower, compressor, and condenser fan)
● Perform full operational check-out of system
● Measure loop temperature, flow rate, pressure drop, and system efficiently
● Check the HVAC cabinet and duct work for leaks
● Verify entire system is operating safely and efficiently
Heat Pump
● Evaporator coil cleaning and inspection
● Condenser coil cleaning and inspection
● Clean and inspect drain lines.
● Remove standing water from drain pans
● Inspect ducts for dust, mold or debris
● Check thermostats and controls to ensure proper operation
● Clean and inspect all electrical connections and the electrical system
● Clean and inspect major components (blower, compressor, and condenser fan)
● Measure the refrigerant charge and system efficiency
● Perform full operational check-out of system
● Check the HVAC cabinet and duct work for leaks
● Remove any debris from around the outdoor unit
● Verify entire system is operating safely and efficiently
Oil Boiler
● Clean and inspect burner assembly
● Replace oil nozzle
● Replace oil filter
● Clean pump screen
● Brush, clean, and inspect tubes, retention head, and smoke pipe
● Check igniter spark
● Check oil pressure
● Check electrical wiring and connections
● Check electrical components
● Check control voltage
● Check zone valve wiring and voltage
● Check expansion tank pressure
● Perform operational checkout
● Test combustion
● Check for leaks
● Verify entire system is operating safely and efficiently
Oil Furnace
● Clean and inspect burner assembly
● Replace oil nozzle
● Replace oil filter
● Clean pump screen
● Brush, clean, and inspect tubes, retention head, and smoke pipe
● Check igniter spark
● Check oil pressure
● Check electrical wiring and connections
● Check electrical components
● Check control voltage
● Check zone valve wiring and voltage
● Check expansion tank pressure
● Perform operational checkout
● Test combustion
● Check for leaks
● Verify entire system is operating safely and efficiently
Water Heater
● Power off the heater at the circuit breaker before doing any work to avoid electrical shock
● Inspect the tank and plumbing connections for leaks, rust, or corrosion
● Look for signs of moisture or dripping near the base
● Ensure the thermostat is set to the desired temperature (typically 120°F for energy efficiency and safety)
● Inspect the expansion tank (if there is one) and verify the bladder is in good condition
● Water heater flush
● Verify entire system is operating safely and efficiently
Frequently Asked Questions
How do I qualify for the complimentary whole-house plumbing inspection?
This service is available to customers enrolled in select maintenance plans. Contact our team to learn which plan options include a complimentary inspection.
What is included in the complimentary whole-house plumbing inspection?
Our inspection covers all major plumbing systems throughout your home, including bathrooms, kitchen, laundry, water heater, and exterior connections. We check for leaks, proper function, water pressure, and overall system health to ensure everything is running as it should.